Clear the Air with VacuVortex:

Silence the Noise, Stop the Dust, and Breathe Easy!

WHAT IS IT AND WHAT DOES IT DO?

500-2

Stop’s Air, Doesn’t Just Redirect It

All the other devices on the market just redirect the air flow from your wet/dry vacuum… The VacuVortex™ stops the air not just redirect it which is unlike any other vacuum muffler you can buy on the shelves of a hardware store

500-3

Easy Installation

The VacuVorteX™ easily attaches directly to your wet/dry vac’s exhaust port and muffles air exiting the unit from creating a gust that just blows dust and debris to allow for efficient cleaning.

500-1

Protect Your Lungs

Patented Technology Making Wet Dry Vacuum Clean-up a Breeze (Without the Breeze). It won’t blow dust from your space up into the air for you to breathe in.

VacuVorteX™

Try us with your wet/dry shop vacuums and you will notice the difference immediately. We don’t put any stress on the motor while still stopping the exhaust. Patented technology!

The VacuVorteX™ attaches directly to your wet-dry vacuum cleaner’s exhaust port and stops air exiting the unit from creating a gust that just blows dust and debris to allow for efficient cleaning.

Outside Diameter: 2 5/8”
Inside Diameter is 2 1/4″

Original price was: $29.98.Current price is: $19.99.

Easy Installation

Simply attach the device to the blower port on your wet-dry vacuum… that’s it!

100+

Positive Feedback

Mobility

The footprint of your vacuum remains unaltered.

Saves Time

Attenuates exhaust allowing for easy, one-pass clean-up. Can save you hours in clean-up time!

Durability

Will not wear out with normal use and can even be cleaned if the main vacuum filter is compromised.

Noise Reduction

Decreases noise by a few decibels.

INDEPENDENT STUDY PROVES SUPERIOR RESULTS

Developed in 1999 and patented in 2017(and most recently updated), the VacuVorteX™ is an easily attached accessory for 2″ 1/2″ circular exhaust ports for wet/dry shop vacs.

It is specifically designed to reduce exhaust turbulence so dramatically that exhaust flow is not detected 10″ from the canister which uniquely qualifies the wet/dry shop vac to be used in closed-in, sensitive areas to be cleaned. Also, and equally important, is that a mere 8.9% reduces the suction at the proximal port

The VacuVorteX™ also reduces the exhaust port decibel level.

In addition, a particulate study was performed to compare the VacuVorteX™ to its competitors (made for Ridgid and Craftsman). The VacuVorteX™ was far superior in the results.

new chart

Mean NET Efficiency at: (in microns)

Vaccum IBR IDExhaust Filter IDFlow (slps)0.3-0.50.5-0.70.7-1.01.0-2.02.0-3.0>3.0
24933-1None78.7069.4077.1183.2085.6689.7994.97
VacuVortex IBR ID 24883-1-276.2082.5691.8896.6798.3198.9199.38
Sears Muffler D9#16993 IBR ID 24883-277.2072.6380.9885.7187.6692.6596.44
Rigid VT 2525 Muffler IBR ID 24883-375.5073.6283.5787.5189.7293.7597.81

TAME THE BEAST!

What does it do?

Attach to your wet-dry vacuum cleaner’s blower port (outside diameter is 2 5/8″ and the inside diameter is 2 1/4″) to attenuate the exhaust coming out. This strong exhaust normally causes small particles (which you’re trying to clean up) to become airborne. These, now airborne, particles will either resettle onto the just-vacuumed surface you spent time cleaning or will be breathed in by anyone in the vicinity. The VacuVorteX™ allows your wet-dry vacuum to be used in sensitive environments without severely compromising your suction power. Patented Technology

 

How does it work?

The VacuVorteX™ is patented technology that has been thoroughly researched and designed to channel a high force exhaust waste stream from an exhaust port into a series of complex baffles. In the final stage, the exhaust stream is directed into the device in a vortex pattern and results in a dissipated flow of air.

These, now airborne, particles will either resettle onto the just-vacuumed surface you spent time cleaning or will be breathed in by anyone in the vicinity. The VacuVorteX™ allows your wet-dry vacuum to be used in sensitive environments without severely compromising your suction power. Patented Technology

Our Product Reviews

Check out why our customers loves us in each projects

I was very reluctant to try this… I was baffled and shocked at the result. Not only was the problem mitigated, but the amount of time needed to effectively clean the area was negligible in comparison as only one single pass was needed and all this from a very powerful vacuum with a blower port.

Christopher D.

Hospital Housekeeping Manager

As a professional in the field I highly recommend this product for industrial as well as home use. It is simple, inexpensive, and should be part of every shop-vac sold.

Alex R.

Mechanical Engineer

We were forced to stop using traditional shop-vacs for settled dust removal as the exhaust would blow the surrounding dust back into the immediate environment before we could contain it, creating additional contaminates to the airborne environment. We have been looking for a portable, low maintenance, inexpensive answer to our dust removal and have found the VacuVortex device.

Edward F.

Mechanical Engineer

I vacuumed my tiled floor with my shop-vac and always had dust flying around. With the VacuVortex I had none. I used it in my truck which is always filled with sand. Again, no particles flying around.

Richard G.

Carpenter

I recently had the opportunity to use the VacuVortex on a shop-vac and it really worked exactly as the manufacturer described. Eliminating the dust created from the turbulent exhaust without reducing the suction power is a real solution for my current problems.

The exhaust blasting out of my shop-vac creates so much dust that breathing becomes difficult, causing me to only work for very short intervals. I am looking forward to owning a VacuVortex.

Tom P.

Respiratory Therapist

I recently purchased this muffler for my wet/dry vac, and it has made a world of difference. Before, the noise from the exhaust fan was deafening, and I couldn’t use the vac without ear protection. With this muffler in place, it’s like a completely different machine. The reduction in noise is incredible, making my cleanup tasks much more pleasant. I can now work comfortably without the constant racket. Highly recommended!

Sarah H.

Home Improvement Enthusiast

I’ve been using my wet/dry vac for years, but the loud noise from the exhaust fan was always a drawback. This muffler is a simple yet effective solution. Installation was a breeze, and the results were immediate. Not only did it significantly reduce the noise, but it also improved the overall air quality in my workshop. Now, I can vacuum up dust and debris without worrying about the noise or fine particles in the air. This muffler is a game-changer for anyone with a wet/dry vac!

John D.

Workshop Craftsman

I can’t believe I waited so long to get this muffler for my wet/dry vac. It’s truly a must-have accessory. The noise reduction is impressive, making my vacuuming tasks much more tolerable. Besides the noise, it also seems to improve the vac’s overall performance. The build quality is excellent, and it fits perfectly. I appreciate the thoughtful design, and I highly recommend it to anyone who uses a wet/dry vac regularly. Don’t hesitate to invest in this muffler; it’s worth every penny!

Mark T.

DIY Enthusiast

With the addition of this simple, easy to attach device, our standard shop-vac exhaust problem has been mitigated.

William B.

Mechanical Engineer

In all my years of vacuuming I have always had particles flying in the air. As I vacuumed with the VacuVortex there were no airborne particles.

Randy B.

Carpenter

Thanks for your response. I went from being underwhelmed to overwhelmed. Thank you for “walking the walk” of customer service – it speaks well for you and your company!

Scott W.

Customer

Thank you very much for the quick response and shipping. I will be recommending your product to anyone who uses a shop vac! I hope your product continues to be a success. Thank you again

Melanie M.

Customer

As a manager of the Housekeeping Dept in the Operating room, I was introduced to the Vacuvortex for our range of cleaning accessories. We couldn’t use the powerful shop type vacuums for most of our needs so resorted to the more cumbersome systems with much less suction. Since attaching this accessory, our “turn-around-time” for the OR’s was remarkably shortened (time is money in the OR). Air flow from the exhaust port was attenuated so dramatically that I used the shop type vacs for literally all vacuuming needs. Accolades from administration for the reduced cleaning time were not of short supply. Thank you for this wonderful product

Chris M.

Customer

My canister wet/dry vac is now used in small spaces where the walls have been freshly painted. Great product!

Joseph B.

Customer

Used the prototype you lent me to evaluate it’s efficiency in my car detailing shop. Absolutely fantastic! No residual airborne dust resettling anywhere! When you mass produce, I will order them for all of my shop vacs. Nothing like it anywhere!

Leo T.

Customer
Mammoth illustration on VacuVortex site

Customer

Let’s Chat

Interested in our product, technology, or patent? Have a question for us or just want to say ‘hi’? We’d love to hear from you.

Get in touch

Meet Our Team

All the other devices on the market just redirect the air flow from your wet/dry vacuum… The VacuVorteX™ stops the air not just redirects it which is unlike anything you can buy on the shelves of a hardware store.

VACU Vortex company logo

Chris Conard

Co-Founder & CEO
Headshot of a man named Ben

Ben Conard

Co-Founder, VP Strategy
Vacu Vortex industrial vacuum cleaner component

Robert Goldsher

VP Operations, Managing Partner